Varglas Nylon Untreated Sleeving

Varflex Nylon untreated sleevings are flexible, protective sheathing that exhibits outstanding toughness and abrasion resistance. It is braided from high-tenacity nylon yarns that have been light and heat stabilized, have low dry-heat shrinkage (6%) and were designed specifically for industrial end uses.

Of the 17 standard sizes of Nylon untreated sleevings offered by Varflex, 10 of them are available both in standard wall (Type 94) and a heavier wall (Type 94H). Type 94H is identical to Type 94 except heavier nylon yarns are used, resulting in wall-thickness increases, depending upon inside diameter. The 7 other standard sizes are supplied in single wall thicknesses and do not carry a type designation. (See Tables below.)

(-55°C to +105°C ) (-67°F to +221°F)

Type(s):

94 | 94-H | Undesignated
 

Approximate Wall Thickness

+/- 0.15"

Size (I.D.)

3/6"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"

Type 94

.025"
.025"
.025"
.025"
.025"
.025"
.035"
.035"
.035"
.035"

Type 94H

.030"
.030"
.030"
.030"
.030"
.030"
.040"
.040"
.040"
.050"

 

Approximate Wall Thickness

+/- 0.15"

Size (I.D.)

1/16"
1/8"
1-1/8"
1-1/4"
1-1/2"
1-3/4"
2"

No Type Designation

.030"
.030"
.040"
.040"
.040"
.040"
.040"

 

Specifications

Varflex Nylon untreated sleevings conforms to Defense Supply Center Richmond’s Commercial item description (CID) A-A-59301 (latest revision) covering “sleeving, textile, braided, synthetic polymer”, and is made from polyamide (nylon) yarns conforming to military specification MIL-C-572 (latest revision), Type P (polyamide), Form Y (yarn).

Applications

Varflex Nylon untreated sleevings are intended for use as mechanical protection in consumer, commercial and industrial applications where flexibility, abrasion resistance and toughness are required. Although not intended as primary electrical insulation, its suppleness and expandability make it the ideal choice. Contributing to its extensive use, as secondary insulation in wire harness assemblies, its ease of installation over irregular shapes and wire bundles provides definite assembly advantages.

Sizes

1/16″ l.D. through 2″ l.D. Other sizes subject to inquiry.

Standard Color

Black

Standard Packaging

Coils or spools at manufacturer’s option, unless otherwise specified.