Coated Varflex Electrical Insulating Sleevings

Spec Sheet Download

Varglas Silicone Rubber Sleeving

Silicone_Rubber_Sleeving

Varglas Silicone Rubber Sleeving is produced by coating braided fiberglass with a high-performance silicone rubber that is extremely flexible and exhibits unusual toughness and abrasion resistance. In addition to having a Class 200°C rating, its brittle point of -73°C also suggests its use in a wide range of applications requiring resistance to temperature extremes.

Specifications

Varglas Silicone Rubber Sleeving conforms to, and is listed on the Qualified Products List (QPL) for, MIL-l-3190/6, latest revision (Grade A); NEMA TF-1, Type 5; and ASTM-D372 .Under the Component Program of Underwriters Laboratories, Grade A Varglas Silicone Rubber is recognized for 200°C, 600 volt service and complies with VW-1 flammability requirements under UL File #E63450. (VW-1 compliance of Grades B through C-3 is covered under UL File #E53690.) CSA International certifies the use of Grade A for 200°C, 600 volt service and flammability requirements under CSA File #LR58486 VW-1/FT1. Varglas Silicone Rubber is incorporated in systems work, per UL Safely Standard 1446, to facilitate product acceptance by UL.

Applications

Varglas Silicone Rubber Sleeving is used in appliances, motors and generators as well as in automotive, marine and aircraft electrical and electronic components such as transformers, coils, relays, etc. where a 200°C thermal rating is required. In addition to being well-suited as heavy duty insulation where subjected to high heat, such as in die-casting and plastic molding, Varglas Silicone Rubber Sleeving is also suitable for use in extremely low-temperature environments such as high altitude and aerospace applications.

Sizes

AWG #24 through 2” l.D. Other sizes subject to inquiry.

Standard Color

Natural and white. Other colors made to order.

Standard Packaging

Coils, spools or 36” lengths at manufacturer’s option, unless otherwise specified. There is no cutting charge for 36” lengths, but lengths other than 36” are subject to cutting charges.

Sizes over 1” l.D. are generally supplied in 36” lengths.

Varglas Silicone Rubber Typical Properties

  Property Procedure Performance
Physical
  Tensile Strength, Coating ASTM-D412 1500 psi
  Ultimate Elongation, Coating ASTM-D412 800% @ 20°C
  Hardness, Coating ASTM-D2240 50 (Durometer)
  Flexibility and toughness, Coating UL 1441 Passes (Penetration Test)
Chemical
  Oil and Solvent Resistance MIL-l-3190/6 Passes (Excellent)
  Water Vapor Resistance MIL-l-3190/6 Passes (Good)
  Resistance to Acids and Alkalies –– Excellent
  Resistance to the Elements –– Unaffected by sunlight and weather
  Compatibility UL 1446 Good. Compatible with most potting compounds
and varnishes
Electrical
  Dielectric Strength after 48/23/50:
  Grade A NEMA TF-1 8000v min. avg., 6000v min. indiv.
  Grade B NEMA TF-1 4000v min. avg., 2500v min. indiv.
  Grade C-1 NEMA TF-1 2500v min. avg., 1500v min. indiv.
  Grade C-2 NEMA TF-1 1500v min. avg., 800v min. indiv.
  Grade C-3 NEMA TF-1 No voltage guarantee
 
  Dielectric Strength after 96/23/96:
  Grade A NEMA TF-1 80% of Original Value.
  Hydrolytic Stability after 336 hrs.
@ 70°C over Constant Water Reflux
MIL-l-3190/6 5000v min. avg.
Thermal
  Thermal Endurance MIL-l-3190/6
UL 1441
Class 200°C (H)
  Brittleness Temperature ASTM-D350 -73°C
  Flame Resistance UL 1441 Passes (VW-1)
    ASTM-D350, Method B Passes
    NEMA TF-1 Passes
    MIL-I-3190/6 Method B Passes
  Pushback MIL-I-3190/6 No cracks or ruptures. 6000 volts min. avg.
breakdown strength.
Note:
  Information contained here is precise and reliable. However, being unique, each end-use should be evaluated to satisfy its specific requirements.

Standard Sizes

Sleeving sizes in the following table are based on the size of round conductors that will fit snugly into the product without distortion of the sleeving.

Wire Size Inside DIameter Wall Thickness (minimum)
 
(AWD)
  Maximum
Inches
Nominal
inches
Minimum
Inches
MM Size
(to .5mm)
MM - Dec.
Equivalent
  Grade A
Inches
Grade B
Inches
Grade C
Inches
No. 24   0.027 0.022 0.020 .5 0.01969   0.011 0.007 0.006
No. 22   0.032 0.027 0.025       0.013 0.007 0.006
No. 20   0.039 0.034 0.032       0.013 0.007 0.006
No. 19   0.044 0.038 0.036 1.0 0.03937   0.013 0.007 0.006
No. 18   0.049 0.042 0.040       0.015 0.007 0.006
No. 17   0.055 0.047 0.045       0.015 0.007 0.006
No. 16   0.061 0.053 0.051       0.015 0.007 0.006
No. 15   0.066 0.059 0.057 1.5 0.05906   0.015 0.007 0.006
No. 14   0.072 0.066 0.064       0.015 0.007 0.006
No. 13   0.080 0.076 0.072 2.0 0.07874   0.015 0.007 0.006
No. 12   0.089 0.085 0.081       0.015 0.007 0.006
No. 11   0.101 0.095 0.091 2.5 0.09842   0.018 0.009 0.008
No. 10   0.112 0.106 0.102       0.018 0.009 0.008
No. 9   0.124 0.118 0.114 3.0 0.11811   0.018 0.009 0.008
No. 8   0.141 0.133 0.129 3.5 0.13780   0.018 0.009 0.008
No. 7   0.158 0.148 0.144 4.0 0.15748   0.018 0.009 0.008
No. 6   0.178 0.166 0.162 4.5 0.17716   0.020 0.011 0.010
No. 5   0.198 0.186 0.182 5.0 0.19685   0.020 0.011 0.010
No. 4   0.224 0.208 0.204 5.5 0.21654   0.020 0.011 0.010
No. 3   0.249 0.234 0.229 6.0 0.23622   0.020 0.011 0.010
No. 2   0.278 0.263 0.258 7.0 0.27559   0.020 0.011 0.010
No. 1   0.311 0.294 0.289 7.5 0.29528   0.020 0.011 0.010
5/16"   0.334 0.313 0.313 8.0 0.31496   0.020 0.011 0.010
No. 0   0.347 0.330 0.325 8.5 0.33464   0.025 0.011 0.016
3/8"   0.399 0.375 0.375 10.0 0.39370   0.025 0.017 0.016
7/16"   0.462 0.438 0.438 11.5 0.45276   0.025 0.017 0.016
1/2"   0.524 0.500 0.500 13.0 0.51181   0.025 0.017 0.016
5/8"   0.655 0.625 0.625 16.5 0.64960   0.025 0.017 0.016
3/4"   0.786 0.750 0.750 19.5 0.76772   0.025 0.017 0.016
7/8"   0.911 0.875 0.875 22.5 0.88582   0.025 0.017 0.016
1"   1.036 1.000 1.000 25.5 1.00470   0.025 0.017 0.016
Over 1" Upon Request
Government Specification
and Designation
Varflex Product Test or Qualification Reference Status
MIL-I-3190/2, Class 130°C, Type B,
Category b, All Colors, All Sizes, Grade A
Varflo, B-A-1 N.Y. 6139-1 On QPL for
MIL-I-3190/2
MIL-I-3190/3, Class 155°C, Type A,
Category a, All Colors, All Sizes, Grade A
Varglas Acrylic 343
and 397, F-A-1
Varflex Report No.4203
and Supplement
On QPL for
MIL-I-3190/3
MIL-I-3190/5, Class 200°C, Type C,
Category c, All Colors, All Sizes, Grade A
Varglas Silicone
Resin 500, H-A-1
Varflex Report No.4202
and Supplement
On QPL for
MIL-I-3190/5
MIL-I-3190/6, Class 200°C, Type D,
Category c, All Colors, All Sizes, Grade A
Varglas Silicone
Rubber, H-A-1
Varfiex Report No.4200
and Supplement
On QPL for
MIL-I-3190/6
MIL-I-3190/7, Class 220°C, Type E,
Category c, All Colors, All Sizes, Grade A
Varglas Viton 231,
R-A-1
Varflex Report No.4204 On QPL for
MIL-I-3190/7
MIL-I-3190/8, Class 220°C, Type D,
Category c, All Colors, All Sizes, Grade A
Varglas ES-4400
Silicone Rubber, R-A-1
Varflex Report No.4201
and Supplement
On QPL for
MIL-I-3190/8
MIL-I-3190/9, Class 240°C, Type D,
Category c, All Colors, All Sizes, Grade A
Varglas 240 Silicone Rubber,S-A-1 Varflex Report No.4205,
Parts I and II
On QPL for
MIL-I-3190/9
MIL-I-631D, Type F, Form U, Grade c*,
Classes I & II, Category 1 (*high temperature)
Vartube SHH-3A and
SHH-6A
U.S. Testing Co.
Report No.51150
On QPL for
MIL-I-631D
MIL-I-631D, Type F, Form U, Grades a & b*,
Classes I & II, Category 1 (*general purpose)
Vartube 120/210 N.Y. 5203-90 On QPL for
MIL-I-631D
 

Definitions

Coated sleeving is a flexible, tubular product braided from cotton, rayon, nylon, glass or other fibers, which is impregnated, coated, or impregnated and coated with an electrical insulating material.


 Nema Grades

A-1

7000* volt average —
5000 volt minimum individual

B-1

4000 volt average —
2500 volt minimum individual

C-1

2500 volt average —
1500 volt minimum individual

C-2

1500 volt average —
800 volt minimum individual

C-3

No dielectric
guarantee
*For sleeving Types 3, 4, and 5, values are 8000 volt average, 6000 volt minimum individual.

For more information, refer to NEMA Standards for Coated Electric Sleeving. Also, ASTM D372.

 

Types & Classes

Coated sleeving is categorized by the type of coating, base fabric material, dielectric breakdown voltage, temperature index, and inside diameter as follows:

Type 2

A flexible treated sleeving made from inorganic-base yarns such as fibrous glass and impregnated or coated with an insulating material which can be shown by applicable experience or accepted test to have at temperature index of 130 (continuous use at 130°C)

Type 3

A flexible treated sleeving made from inorganic-base yarns such as fibrous glass and impregnated or coated with an insulating material, such as polyvinyl chloride, which can be shown by applicable experience or accepted test to have a temperature index of 105 (continuous use at 105°C).

Type 4

A flexible treated sleeving made from inorganic-base yarns such as fibrous glass and impregnated or coated with an insulating material, such as silicone resin or polytetrafluoroethylene, which can be shown by applicable experience or accepted test to have a temperature index of 200 (continuous use at 200°C).

Type 5

A flexible treated sleeving made from inorganic-base yarns such as fibrous glass and impregnated or coated with an insulating material, such as silicone elastomer, which can be shown by experience or accepted test to have a temperature index of 200 (continuous use at 200°C).

Type 6

A flexible treated sleeving made from inorganic-base yarns such as fibrous glass and impregnated or coated with an insulating material, such as epoxies, polyesters, or acrylics, which can be shown by experience or accepted test to have a temperature index of 155 (continuous use at 155°C).


Sample Folders

Contact us for a standard products folder that contains samples of our most popular sleevings.

Specialty Products Folder

We also have a new sample folder specifically highlighting custom specialized product opportunities.

Varflex Flyer

Download a copy of our sales flyer.

Downloads

Accreditations

http://ul.com