Varflex Products
General Overview
Other Varflex Products

Varflex Accreditations

Varflex Corporation
512 W. Court Street
Rome, NY USA 13440
Phone: 315-336-4400
Fax: 315-336-0005
EMail: salesvarflex.com

Uncoated (untreated or lightly treated) sleevings are used for secondary insulation, harnessing, physical protection, and serve as good anchors for varnish treatments in electrical units. Because of this, uncoated sleevings find extensive application with potting plastics where the sleeving acts as a substratum to support potting compounds to enhance the electrical and mechanical properties of a system.

Varglas S1600(-70°C to +482°C / -94°F to +900°F)

>> Varglas S1600, Untreated

— Not heat cleaned or treated, but containing its original sizing, boron free.

>> Varglas S1600, Type H

—Heat cleaned only. Not treated with sizing or pigments after heat cleaning, boron free.

>> Varglass S1600, Type HO

—Heat cleaned and treated with an acrylic resin binder, boron free.

>> Varglas S1600, Type HM

—Heat cleaned and treated with an oleoresinous binder, boron free.

>> Varglas S1600, Type ML

—Heat cleaned and treated with Pyre ML® binder, boron free.

Silflex Sleeving(-50°C to +200°C / -56°F to +392°F)

>> Silflex

— Heat cleaned, impregnated with a hightemperature silicone resin.

Varglas Non-Fray Sleeving(-60°C to +316°C / -76°F to +600°F)

>> Non-Fray, Type H

— Heat cleaned only. Not treated with sizing or pigments after heat cleaning.

>> Non-Fray, Type HO

— Heat cleaned and treated with an acrylic resin binder.

>> Non-Fray, Type HP

— Heat cleaned and treated with an acrylic resin binder, slightly more flexible than HO.

>> Non-Fray, Type HM

— Heat cleaned and treated with an oleoresinous varnish binder.

Nylon

>>Nylon

— Untreated, excellent abrasion resistance and ultimate flexibility. Intended for use over insulated wire and cable, not as primary insulation.

Varglas Litewall*

>>Varglas Litewall, Type A*

2 Versions Available

— .008" / 0.2032mm wall, Untreated

— .008" / 0.2032mm wall, acrylic resin impregnated.

>> Varglas Litewall, Type B*

2 Versions Available

— .006" / 0.1254mm wall, Untreated

— .006" / 0.1254mm wall, acrylic resin impregnated.

>> Varglas Litewall, Type HA*

— .008" / 0.2032mm wall, heat cleaned.

>> Varglas Litewall, Type HB*

— .006" / 0.1254mm wall, heat cleaned.

Varglas Volan®*

>> Varglas Volan®*

— Heat cleaned & impregnated with DuPont's Volan® , a coupling agent.

NOMEX®*

>> Varglas NOMEX® *

2 Versions Available, Braided with Dupont’s Nomex® fibers, a flame resistant synthetic aromatic polyamide polymer.

— Pyre-ML® Impregnated

— Untreated

* No formal data sheets are available for these products at this time.