Certain applications require the use of a non braided – homogeneous material, extruded tubing. Varflex offers several types extruded tubing that cover a variety of performance characteristics. These tubings can be used either as primary or secondary electrical insulating sleeving or as hoses to transport compatible gases and liquids, or as vacuum hoses.

>> Vartube, Type SHH

— A high heat-resistant, Class 105 tubing recognized by UL for continuous use in 105°C
applications and VW-1 Flame lest compliance under File #E69513. Also meets the requirements of, and is
on the QPL for, MIL-I-631, Grade c, Classes I and II, Category 1.

>> Vartube, Type 120/210

— A high-quality, general purpose Class 90 tubing which exhibits an exceptionally wide temperature range from -55°C to 90°C maintaining a high dielectric strength and excellent flexibility over its full thermal span. .

>> Vartube, Type 302/203

— A Class 85 tubing able to withstand temperatures as low as -70°C.Its low- temperature characteristics exhibit unusual flexibility and high cut-through resistance with maintenance of dielectric strength. The upper thermal limit of 85°C is outstanding for this type of tubing. Meets the requirements of
MIL-l -7444, Class 1, Types I and Ill.

>> Vex-Sil Extruded SIlcone Rubber Tubing*(-59°C to +260°C / -74°F to +500°F)

— Made from silicone rubber elastomers with high-heat resistance, low temperature flexibility, excellent physical and mechanical properties, good weathering characteristics and resistance to most chemicals.